Prepare for the fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D
NEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx
Exam Anywhere with Valid fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: DNEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx
PDF Dumps
The pages of our products lists many important information about our 1z1-078 study materials and they include the price, version and updated time of our products, the exam name and code, the total amount of the questions and answers, the merits of our 1z1-078 study materials and the discounts, In order to promise the high quality of our 1z1-078 study materials, our company has outstanding technical staff, and has perfect service system after sale.
You continue marking and logging multiple clips from one or many tapes 1z1-078 Valid Dumps Questions before capturing those clips in one capture session, Should we release in June or hold off until August and have more features?
Unleashing Talent in an Agile Culture: Leading through Trust and Interactive 1z0-1041-22 EBook Ownership, Another student asks a long question, which Charles fields as, How do you get playful results with difficult' media?
Which equipment would assist the client with a total hip replacement 1z1-078 Real Brain Dumps with activities of daily living, If you had met Frances, you would not have had to guess about her life philosophy.
Tacit knowledge is not codified and is not easily copied, The company Exam 1z1-078 Outline never stops elaborating on its convenience pitch, constantly surprising, delighting, and, yes, inspiring its customers.
100% Pass Quiz 2025 1z1-078: Oracle Database 19c: RAC, ASM, and Grid Infrastructure Administration – Trustable Valid Dumps Questions
It is not a cheapskate plan, Did the Error Begin with a https://validdumps.free4torrent.com/1z1-078-valid-dumps-torrent.html Past Hardware or Software Change, Romance indie We were unaware that online bodice rippers were so popular.
Converting Image File Formats, Analyze a Scenario and Select 1z1-078 Valid Dumps Questions the Appropriate Type of Mitigation and Deterrent Techniques, Develop, deploy, and enforce security policies.
Thanks to the Actual tests, The team typically consists of an experienced critical-care nurse and a respiratory therapist, The pages of our products lists many important information about our 1z1-078 study materials and they include the price, version and updated time of our products, the exam name and code, the total amount of the questions and answers, the merits of our 1z1-078 study materials and the discounts.
In order to promise the high quality of our 1z1-078 study materials, our company has outstanding technical staff, and has perfect service system after sale, If you have any doubt about the questions or advice of our 1z1-078 exam collection, we will provide the free demo for your reference before purchasing.
We accord you an actual exam environment simulated through our practice test sessions that proves beneficial for 1z1-078 exams preparation, With the obvious marks, you will soon get your information in the next review.
2025 1z1-078 – 100% Free Valid Dumps Questions | Updated Oracle Database 19c: RAC, ASM, and Grid Infrastructure Administration Interactive EBook
1z1-078 practice guide has such effects because they have a lot of advantages, For example, the PC version of 1z1-078 exam torrent boosts installation software application, simulates the real exam, supports H13-711-ENU Reliable Test Bootcamp MS operating system and boosts 2 modes for practice and you can practice offline at any time.
Besides, all exam candidates who choose our 1z1-078 real questions gain unforeseen success in this exam, and continue buying our 1z1-078 practice materials when they have other exam materials’ needs.
We have the specialized technicians to maintain the website at times, therefore Mobile-Solutions-Architecture-Designer Reliable Test Testking the safety of website is guaranteed, and if you indeed encounter some problem, just contact with our service stuff, they will help you to solve the problem.
Our company always put the users' experience as 1z1-078 Valid Dumps Questions an important duty to deal with, so that we constantly want to improve the quality of our1z1-078 exam preparation questions since ten years ago to make sure that our customers will be satisfied with it, and we make it today.
More guarantee, if you fail, no worry about your Oracle 1z1-078 exam cost, we will return your full refund for it, One the other hand, the staff of our 1z1-078 exam dumps all have a sense of responsibility so 1z1-078 Valid Dumps Questions that they will never let out any personal information of customers to bring them any unnecessary troubles.
For those candidates who do not have enough Reliable 1z1-078 Exam Cost time to prepare, the most concentrated examination profiles are for you, We appliedinternational recognition third party for the 1z1-078 Valid Dumps Questions payment, all our online payment are accomplished by the third safe payment gateway.
Let me be clear here a core value problem of Masthead, You can try the Soft version of our 1z1-078 exam question, which can simulate the real exam.
NEW QUESTION: 1
You are developing a SQL Server Integration Services (SSIS) package.
The package sources data from an HTML web page that lists product stock levels.
You need to implement a data flow task that reads the product stock levels from the HTML web page.
Which data flow source should you use?
A. Custom source component
B. Flat File source
C. XML source
D. Raw File source
Answer: A
Explanation:
Explanation/Reference:
Explanation:
Integration Services can extract and transform data from a wide variety of sources. You can extract data from flat files, XML files, Microsoft Excel workbooks, and files that contain raw data. You can also extract data by accessing tables and views in databases and by running queries. You can also write custom sources.
References: https://docs.microsoft.com/en-us/sql/integration-services/data-flow/data-flow?view=sql-server-
2017
NEW QUESTION: 2
What is the safest way to close an application?
Options are :
A. By sending the Alt + F4 hotkeys
B. By using the Close Application activity
C. By using the Process Name property of the Kill Process Activity
Answer: B
NEW QUESTION: 3
You need to display the first names of all customers from the CUSTOMERS table that contain the character 'e' and have the character 'a' in the second last position. Which query would give the required output?
A. SELECT custfirstname FROM customers
WHERE INSTR(cust_first_name. 'e')IS NOT NULL AND SUBSTR(cust_first_name. 1 .-2)='a';
B. SELECT custfirstname FROM customers
WHERE INSTR(cust_first_name. 'e')oM AND SUBSTR(cust_first_name. -2, 1'a';
C. SELECT custfirstname FROM customers
WHERE DSTSTR(cust_first_name, 'e')
fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D
NEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx
Desktop Practice Test Software fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: DNEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx
VCE Dumps
With the help of our fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D
NEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx
desktop practice test software, you will be able to feel the real exam scenario. Its better than fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: DNEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx
vce dumps questions. If you want to pass the 1z1-078 fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: DNEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx
exam in the first attempt, then don’t forget to go through the 1z1-078 desktop practice test software provided by the Masthead. It will allow you to assess your skills and you will be able to get a clear idea of your preparation for the real 1z1-078
exam. It is the best way to proceed when you are trying to find the best solution to pass the fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: DNEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx
exam in the first attempt.
We back all of our products
We provide a guarantee on all of our Oracle Database 19c: RAC, ASM, and Grid Infrastructure Administration Certification fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D
NEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx
test products, and you will be able to get your money back if we fail to deliver the results as advertised. We provide 100% money back guarantee on all of our fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: DNEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx
test questions products, and we are always available to provide you top notch support and new fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: DNEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx
questions.
If you are facing issues in downloading the fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: DNEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx
study guide, then all you have to do is to contact our support professional, and they will be able to help you out with fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: DNEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx
answers.
Desktop Practice Test Software for fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D
NEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx
Exam
Once you have prepared for the 1z1-078 fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D
NEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx
exam, you can then move on to our fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: DNEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx
practice test software which is perfect for the self-assessment. We are offering self-assessment features that will allow you to prepare for the
exam.
We highly recommend you to go through our desktop fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D
NEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx
practice test software multiple times so you can get 100% success in the actual fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: DNEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx
exam. It will allow you to get an idea of the real exam scenario so you can avoid problems after visiting the fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: DNEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.
You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx
testing center.
