You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx

fii-<br/>sMiame).-2)='a';<br/><strong>D.</strong> SELECT custfirstname<br/>FROM customers<br/>WHERE INSTR(cust_first_name, 'e')<>0 AND<br/>SUBSTR(cust_first_name. -2, 1)=a;<br/><strong>Answer: D</strong><br/><br/></p><p><strong>NEW QUESTION: 4</strong><br/>Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.<br/>On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.<br/><img src=

dumps" class="responsive-image" style="margin-top: 20px">

CIS-HAM Dumps - CIS-HAM PDF Demo, CIS-HAM Online Tests - Masthead

Exam Code: fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

NEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.

You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx

Vendor Name: CIS-HAM

Total Practice Questions : 60

Pass the

exam today with the help fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

NEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.

You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx

dumps bundle pack. We offer money back guarantee on all our fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

test products. Don’t forget to maximize your success chances by using fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

Desktop practice test software.

$100 Today

Package
fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

Saving Pack

Free Updates
90 days

Download Limit
Unlimited

Usage
2 PCs

Instant Download
Yes

fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

Practice Test

Practice Test Software

Last Updated:
Jul 12, 2020

$75

fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

Questions

Questions & Answers

Last Updated:
Jul 12, 2020

$69

Check out Free fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

Sample Questions [Demo]

You can go through CIS-HAM fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

sample questions demo to get a clear idea of the fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

training material before making a final decision.

Desktop fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

NEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.

You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx

Testing Engine
fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

NEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.

You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx

PDF Questions Dumps
Verified fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

NEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.

You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx

Answers
Regular free updates

fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

Exam Prep with Passing Guarantee
We offer multiple fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

exam guarantees on all of our products.

100% money back guarantee.
100% passing guarantee
50,000+ satisfied customers
Expertly curated CIS-HAM fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

NEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.

You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
*The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
*The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx

exam prep material.

Prepare for the fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

NEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.

You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx

Exam Anywhere with Valid fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

NEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.

You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx

PDF Dumps

Name: CIS-HAM Dumps
Brand: Masthead
SKU: CIS-HAM
Price: 39 USD
Availability: InStock
Rating: 4.9 (2834 reviews)

Wir aktualisieren kontinuierlich unsere Prüfung braindumps, um die neuesten neuen Versionen der CIS-HAM: Certified Implementation Specialist - Hardware Asset Management Dumps zu behalten, Wenn Sie Masthead CIS-HAM PDF Demo wählen, können Sie viel Zeit und Energie ersparen und zwar die Prüfung erfolgreich bestehen, Danach können Sie Ihre verstärkte IT-Fähigkeit und die Freude der Erwerbung der ServiceNow CIS-HAM Zertifizierung erlangen, In den letzten Jahren sind unsere CIS-HAM Studienmaterialien: Certified Implementation Specialist - Hardware Asset Management immer beliebter bei den Prüfungskandidaten, weil immer mehr Leute mit Unterstützung von unseren CIS-HAM Zertifizierungstraining-Fragen das wertvolle Zertifikat erwerbt haben.

Haha, wir passen alle zu unserm Geschäft, Sollte sie in die Gewalt CIS-HAM Tests eines andern geraten sein, Mit einem Wort, Herr, ich bin seelenvergnügt, dass ich heute einen Mann von eurem Wert getroffen habe.

Zwei, drei Male kam es auch über ihre Lippen, CIS-HAM Testking aber mit einemmal fühlte sie, daß es tote Worte waren, Für die Zentralbehörden ist die Macht der lokalen Herren, die am Ende der politischen CIS-HAM Testing Engine Struktur auftaucht, destruktiver als die politische Macht der lokalen Gouverneure.

Kann schon sein sagte Ron, Wenn wir segeln CIS-HAM Fragen Beantworten würden, ja räumte Theon ein, Was für Angelegenheiten, Der Stuhl ihres Onkels war leer, Dieses Haus, erwiderte der Kaufmann, gehörte CIS-HAM Dumps einem gewissen Ghatryf an, der gestorben ist, und von dem ich es geerbt habe.

Wenn ich ging und sie aus dem Fenster sah und ich unter ihrem traurigen Blick CIS-HAM Dumps ins Auto stieg, brach es mir das Herz, Zurückzahlung aller Gebühren, wenn..., Das Konzept der einfachen Existenz kommt vom Schicksal des anderen.

Kostenlose Certified Implementation Specialist - Hardware Asset Management vce dumps & neueste CIS-HAM examcollection Dumps

Ich gestehe Ihnen ganz offen, Warinka, daß ich mich jetzt in https://testantworten.it-pruefung.com/CIS-HAM.html einer äußerst verzweifelten Lage befinde, das heißt, bisher habe ich in meinem Leben noch nichts Aehnliches durchgemacht.

Sie ist in die Septe gegan- gen und hat ihre Kerzen angezündet wie CIS-HAM Testfagen eine anständige Lady, aber fast jede Nacht hat sie den Götterhain aufgesucht, Schön, dich hier mal wieder zu sehen, Jacob.

Oder noch einen Schwiegervater, Sie öffnete sie halb und ließ CIS-HAM Dumps ihre weiche Zunge in Tengos Mund gleiten, Ich schaute auf meine Hände, um seinen Ge¬ sichtsausdruck nicht zu sehen.

Ich darf nicht lдnger bleiben, Wieder verschloss er seine 220-1101 PDF Demo Lippen, Die meisten Dinge, die für andere Kinder selbstverständlich waren, waren es für Tengo keineswegs.

Wie ist das Denken, das die ganze Existenz als Leben" hält, nicht Physiologie, HFCP Online Tests Das ist wohl gesagt und bald gesagt, Das Licht tut mir in den Augen weh, Und ich möchte mir von Cersei Lennister einen blasen lassen.

Die seit kurzem aktuellsten ServiceNow CIS-HAM Prüfungsunterlagen, 100% Garantie für Ihen Erfolg in der Certified Implementation Specialist - Hardware Asset Management Prüfungen!

Was soll ich euch damit ermüden, wie ich viele 312-38 Musterprüfungsfragen Tage hindurch das Haus zu jeder Zeit umschlich, ohne auch nur das mindeste zu entdecken, wie alle Erkundigung, alles Forschen zu keiner bestimmten CIS-HAM Dumps Notiz führte, und wie endlich das schöne Bild meiner Vision zu verblassen begann.

Das Mädchen sprang vom Steg auf und lief zum Haus, Diese menschliche CIS-HAM Dumps Meisterschaft besteht darin, den Status und die Beziehungen zwischen denen, die existieren, sicherzustellen.

Doch für das Merkzeichen des Arms entschieden, konnt CIS-HAM Dumps ich leicht mich selbst überreden, daß vielleicht nur eine akustische Täuschung die Stimmealt und gellend klingen lassen, und daß ebenso CIS-HAM Online Praxisprüfung vielleicht nur des, vom Graulichen befangenen, Konditors trügliches Ohr die Töne so vernommen.

Zunächst müssen wir Lady Varys loswerden, Der CIS-HAM Fragen&Antworten Mann auf dem Wagen war der Bäcker vom Dörfli, welcher seine Mehlsäcke nach Hause fuhr.

NEW QUESTION: 1
You are developing a SQL Server Integration Services (SSIS) package.
The package sources data from an HTML web page that lists product stock levels.
You need to implement a data flow task that reads the product stock levels from the HTML web page.
Which data flow source should you use?
A. Custom source component
B. Flat File source
C. XML source
D. Raw File source
Answer: A
Explanation:
Explanation/Reference:
Explanation:
Integration Services can extract and transform data from a wide variety of sources. You can extract data from flat files, XML files, Microsoft Excel workbooks, and files that contain raw data. You can also extract data by accessing tables and views in databases and by running queries. You can also write custom sources.
References: https://docs.microsoft.com/en-us/sql/integration-services/data-flow/data-flow?view=sql-server-
2017

NEW QUESTION: 2
What is the safest way to close an application?
Options are :
A. By sending the Alt + F4 hotkeys
B. By using the Close Application activity
C. By using the Process Name property of the Kill Process Activity
Answer: B

NEW QUESTION: 3
You need to display the first names of all customers from the CUSTOMERS table that contain the character 'e' and have the character 'a' in the second last position. Which query would give the required output?
A. SELECT custfirstname FROM customers
WHERE INSTR(cust_first_name. 'e')IS NOT NULL AND SUBSTR(cust_first_name. 1 .-2)='a';
B. SELECT custfirstname FROM customers
WHERE INSTR(cust_first_name. 'e')oM AND SUBSTR(cust_first_name. -2, 1'a';
C. SELECT custfirstname FROM customers
WHERE DSTSTR(cust_first_name, 'e')

fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

NEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.

You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx

Desktop Practice Test Software fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

NEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.

You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx

VCE Dumps

With the help of our fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

desktop practice test software, you will be able to feel the real exam scenario. Its better than fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

vce dumps questions. If you want to pass the CIS-HAM fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

exam in the first attempt, then don’t forget to go through the CIS-HAM desktop practice test software provided by the Masthead. It will allow you to assess your skills and you will be able to get a clear idea of your preparation for the real CIS-HAM

exam. It is the best way to proceed when you are trying to find the best solution to pass the fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

exam in the first attempt.

We back all of our products

We provide a guarantee on all of our Certified Implementation Specialist - Hardware Asset Management Certification fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

test products, and you will be able to get your money back if we fail to deliver the results as advertised. We provide 100% money back guarantee on all of our fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

test questions products, and we are always available to provide you top notch support and new fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

questions.

If you are facing issues in downloading the fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

study guide, then all you have to do is to contact our support professional, and they will be able to help you out with fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

answers.

Desktop Practice Test Software for fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

NEW QUESTION: 4
Your network contains an Active Directory domain named adatum.com. All domain controllers run Windows Server 2012. The domain contains a virtual machine named DC2.
On DC2, you run Get-ADDCCloningExcludedApplicationList and receive the output shown in the following table.

You need to ensure that you can clone DC2.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an empty file named DCCloneConfig.xml
B. Add the following information to the DCCloneConfigSchema.xsd <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
C. Create a filename CustomDCCloneAllowList.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
D. Create a filename DCCloneConfig.xml that contains the following information <AllowList>
<Allow>
<Name>App1</Name>
<Type>Service</Type>
</Allow>
</AllowList>
E. Create an empty file named CustomDCClonesAllowList.xml
Answer: A,C
Explanation:
D: Run Get-ADDCCloningExcludedApplicationList cmdlet In this procedure, run the Get-ADDCCloningExcludedApplicationList cmdlet on the source virtualized domain controller to identify any programs or services that are not evaluated for cloning. You need to run the Get-ADDCCloningExcludedApplicationList cmdlet before the New- ADDCCloneConfigFile cmdlet because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file. To identify applications or services that run on a source domain controller which have not been evaluated for cloning Get-ADDCCloningExcludedApplicationList Get-ADDCCloningExcludedApplicationList -GenerateXml
E: The clone domain controller will be located in the same site as the source domain controller unless a different site is specified in the DCCloneConfig.xml file.
Note:
The Get-ADDCCloningExcludedApplicationList cmdlet searches the local domain controller for programs and services in the installed programs database, the services control manager that are not specified in the default and user defined inclusion list. The applications in the resulting list can be added to the user defined exclusion list if they are determined to support cloning. If the applications are not cloneable, they should be removed from the source domain controller before the clone media is created. Any application that appears in cmdlet output and is not included in the user defined inclusion list will force cloning to fail.
The Get-ADDCCloningExcludedApplicationList cmdlet needs to be run before the New-ADDCCloneConfigFile cmdlet is used because if the New-ADDCCloneConfigFile cmdlet detects an excluded application, it will not create a DCCloneConfig.xml file.
*DCCloneConfig.xml is an XML configuration file that contains all of the settings the cloned DC will take when it boots. This includes network settings, DNS, WINS, AD site name, new DC name and more. This file can be generated in a few different ways.
The New-ADDCCloneConfig cmdlet in PowerShell By hand with an XML editor By editing an existing config file, again with an XML editor (Notepad is not an XML editor.)
Reference: Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100)
See
http://blogs.dirteam.com/blogs/sanderberkouwer/archive/2012/09/10/new-features-in-active-directorydomain-services-in-windows-server-2012-part-13-domain-controller-cloning.aspx

Exam

Once you have prepared for the CIS-HAM fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

exam, you can then move on to our fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

practice test software which is perfect for the self-assessment. We are offering self-assessment features that will allow you to prepare for the

exam.

We highly recommend you to go through our desktop fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

practice test software multiple times so you can get 100% success in the actual fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

exam. It will allow you to get an idea of the real exam scenario so you can avoid problems after visiting the fii-
sMiame).-2)='a';
D. SELECT custfirstname
FROM customers
WHERE INSTR(cust_first_name, 'e')<>0 AND
SUBSTR(cust_first_name. -2, 1)=a;
Answer: D

testing center.

Please Wait...

CIS-HAM Dumps - CIS-HAM PDF Demo, CIS-HAM Online Tests - Masthead

Vendor Name: CIS-HAM

Total Practice Questions : 60

Satisfied Customers

Hot Certifications

Popular Certification

Kostenlose Certified Implementation Specialist - Hardware Asset Management vce dumps & neueste CIS-HAM examcollection Dumps

Die seit kurzem aktuellsten ServiceNow CIS-HAM Prüfungsunterlagen, 100% Garantie für Ihen Erfolg in der Certified Implementation Specialist - Hardware Asset Management Prüfungen!

We back all of our products